HOW TO PROLONG THE LIFE OF YOUR HOME'S HOT WATER SYSTEM THROUGH MAINTENANCE

How to Prolong the Life of Your Home's Hot Water System Through Maintenance

How to Prolong the Life of Your Home's Hot Water System Through Maintenance

Blog Article

Request Free Estimate

The content following next relating to How to Maintain Your Water Heater & Prolong its Life is highly motivating. You should see for yourself.


Tips For Maintaining Your Hot Water Heater
Hot water is essential for day-to-day convenience, whether it's for a rejuvenating shower or washing dishes. To guarantee your warm water system runs successfully and lasts much longer, regular maintenance is essential. This short article offers functional ideas and insights on exactly how to preserve your home's warm water system to avoid disruptions and expensive repair services.

Introduction


Maintaining your home's warm water system could appear difficult, yet with a couple of basic actions, you can guarantee it runs efficiently for many years to find. This guide covers everything from recognizing your warm water system to do it yourself upkeep tips and knowing when to hire expert assistance.

Value of Keeping Your Warm Water System


Normal upkeep not just extends the lifespan of your hot water system but also ensures it operates efficiently. Overlooking maintenance can result in reduced effectiveness, higher energy expenses, and even premature failure of the system.

Indications Your Warm Water System Demands Maintenance


Knowing when your hot water system needs interest can stop significant concerns. Keep an eye out for indicators such as inconsistent water temperature, unusual noises from the heating unit, or rustic water.

Recognizing Your Hot Water System


Before diving into upkeep jobs, it's handy to recognize the standard components of your hot water system. Generally, this includes the water heater itself, pipes, anode rods, and temperature controls.

Regular Monthly Maintenance Tasks


Routine regular monthly checks can assist capture small problems before they intensify.

Flushing the Water Heater


Flushing your water heater eliminates sediment buildup, improving efficiency and prolonging its life.

Checking and Replacing Anode Rods


Anode rods prevent deterioration inside the container. Evaluating and changing them when broken is vital.

Checking and Changing Temperature Settings


Adjusting the temperature level setups makes sure ideal performance and safety.

DIY Tips for Upkeep


You can execute numerous maintenance tasks yourself to maintain your warm water system in leading condition.

Looking for Leakages


On a regular basis evaluate pipelines and links for leaks, as these can cause water damages and greater costs.

Examining Stress Alleviation Valves


Examining the pressure relief valve guarantees it operates appropriately and prevents extreme stress build-up.

Protecting Pipes


Insulating warm water pipes reduces warmth loss and can conserve power.

When to Call an Expert


While DIY upkeep is valuable, some concerns call for specialist know-how.

Complicated Problems Needing Professional Help


Examples consist of significant leaks, electric problems, or if your hot water heater is consistently underperforming.

Routine Specialist Maintenance Perks


Professional maintenance can consist of comprehensive evaluations, tune-ups, and making certain conformity with security criteria.

Final thought


Regular maintenance of your home's warm water system is necessary for effectiveness, longevity, and price financial savings. By complying with these suggestions and knowing when to look for expert help, you can ensure a trustworthy supply of hot water without unanticipated interruptions.

Water Heater Maintenance Tips to Extend the Life of Your System


Every homeowner should do their best to properly maintain their hot water heater system. Whether you have a gas hot water tank or an electric hot water heater, even a tankless system, there are some things that can be done on your own without calling upon a professional hot water installer.



These simple maintenance tips will help to ensure the life of your hot water systems so you don't have to worry about being without hot water for any considerable amount of time.


Test the TPR Valve


This safety feature has been installed on every hot water tank since 1985 and will help avoid an explosion of your hot water tank if built-up pressure occurs.



To access and test your TPR valve, locate the small dial that looks like a tire stem or bicycle valve on the hot water tank. Turn the dial to shut off hot water to your home or business, then turn it in the opposite direction until you hear hissing noises from the hot water tank.



The valve should be set at 120psi [pounds per square inch]. If pressure is too high, simply open the hot water tanks faucet slightly to reduce the pressure from the pressure relief valve before testing again.


Check the Anode Rod


The anode rod inside your hot water tank attracts rust and sediment that would otherwise build up inside of your hot water tank and corrode it away. A hot water heater maintenance tip is every 6 months you should check this anode rod to ensure it's not completely deteriorated yet (please note: some newer hot water heaters do not have an anode rod).



To replace this hot water heater maintenance tip, simply unscrew the hot water tank drain valve and the hot water tank will drain out. Remove the hot water heater vent screen with a putty knife or flat-head screwdriver to reach the rod. Unscrew it from its mount, then purchase a new hot water heater maintenance tip anode rod (same size as your hot water tanks original rod) and screw it back on.


Drain the Tank


Draining your hot water tank is probably one of those 'gotta-do' tasks you've been putting off for way too long... Well actually, you should never let your hot water tank run completely dry (unless you want to damage the hot water tank).



If your hot water heater runs out of hot water, simply drain the hot water tank. Turn off your hot water heater's TPR valve (as mentioned before) and open the hot water tanks faucet.


Adjust the Temperature


The hotter your hot water supply is, the more energy it will consume. You can adjust this setting by turning your hot water heaters thermostat up or down accordingly. This simple hot water heater maintenance tip can save you money on monthly utility bills if done correctly! This is great for business owners with employees that leave their hot water run too long at home or folks that like really hot showers!



Use a flathead screwdriver to adjust the temperature. This works for either a gas water heater or electric water heater.


Insulate the Heater


Insulating an older water heater keeps hot water hot for much longer. Insulating hot water heaters is one of the best hot water heater maintenance tips you can follow because it also helps keep your hot water tank water hot while waiting for use (instead of cooling off).



You can insulate hot water heaters by purchasing an insulation shield or simply wrapping the hot water tank in bubble wrap.


Insulate the Pipes


Insulating hot water heaters pipes keeps them from losing heat down to the hot water heater, which saves more energy and prolongs the life of your hot water heater! Simply purchase foam pipe insulation from a hardware store and wrap each pipe with it before connecting it to the hot water tank.


Flush Yearly


Flushing out sediment can help you be hot water heater maintenance tip savvy. Sediment build-up and calcium deposits in hot water tanks is caused by everyday minerals found in tap and well water (hardness) that enters the hot water tank through your hot and cold water supply valve.



A simple annual hot water tank flush will remove this sediment from your hot water heater before it has time to corrode its inner walls.


Replace the Air Intake Filter


The air intake filter of a hot water heater cuts down on energy costs since it allows less air into the unit, therefore making it run more efficiently. This simple hot water heater maintenance tip saves money on hot water heaters hot and cold water pipes by preventing it from taking in hot air that reduces the hot water tanks hot water capacity.


Get a Professional Inspection


For the safety of gas heaters or an electric heater, you should always get a professional hot water heater inspection at least once per year or after any maintenance hot water heater tips that needs to be done. A professional hot water tank inspector will take note and recommend any further action if need be to ensure your water heater's efficiency.


Schedule Water Heater Maintenance From ARS/Rescue Rooter


If you feel like your water heating costs are getting too high, or if your existing water heater doesn't run efficiently anymore, you need a trusted plumbing company to perform water heater maintenance service.



At ARS/Rescue Rooter, our trained plumbers perform basic water heater maintenance on a regular basis, and can help extend the life of your water heater. And if your existing system needs replaced, we have a wide selection of tankless water heater options.

https://www.ars.com/blog/water-heater-maintenance-tips


How to Maintain a Hot Water Heater in a Few Simple Steps

We had been made aware of that article on What Kind of Maintenance Do Water Heaters Need? through an acquaintance on a different website. Appreciated our blog posting? Please share it. Help somebody else discover it. Thanks so much for going through it.


Click Here

Report this page